5. Settings
5-2-3. Resetting the Detailed Settings
Power ON
Current value display
Detailed
settings
Minimum
display
resolution
Display
switching
Axis label
switching
Compensation
value
Flicker control
Sleep
or
Start of operation
5-6
(E)
(General-purpose Applications and Milling Machine Function)
* The setting in parentheses ( ) is the factory setting.
*
1
Select axis
Use
and
Performed for each axis.
2
Select axis
Use
to select setting content
Performed for each axis.
3
Select axis
Use
to select setting content
Performed for each axis.
4
Use
to select the setting (compensation), and then set each option
Select axis
Enter the compensation value
5
Use
to select setting content
6
Use
to select setting content
(When the minimum display resolution is 0.001 mm)
indicates the process when the setting does not
be changed.
to select setting content
1 Setting at
measuring unit
resolution or
higher/Diameter
display at
measuring unit
resolution
(except for
angle)/Polarity
2 IN-1/IN-2/IN-3/
IN -
3 X/Y/Z
4 OFF/LIN Err
* See Part 5-5,
"Compensation".
5 OFF/1/2
6 OFF/1/5/10/30/
60
or
LH70