Starting And Exiting Operation; Power On; Starting Operation - Sony LH70-Serie Bedienungsanleitung

6. Starting and Exiting Operation

Note
Do not try to turn the power on and off by plugging and unplugging the DC output connector of the AC
adaptor.
Doing so may cause the data stored in the internal memory to be deleted.

6-1. Power ON

1
Turn on the AC power.
When the AC power is already on
1
Press the key.
The display flashes in the order "
" " lights up.
If " " is flashing or "
"Troubleshooting".

6-2. Starting Operation

1
Turn on the power. (See Part 6-1.)
2
Press the key for display 1, 2, or 3.
The display value at the end of the previous operation (in incremental mode when the power is turned
off) is displayed.
LH70
" t " " t "
" is lit up, see Part 9, "Alarm Display" and Part 10,
ABS lamp goes out
" t " " t " ", and finally
Reset key
6-1
(E)