Power Supply - Team Orion ADVANTAGE ONE 406 Bedienungsanleitung

LCD SCREEN DATA DISPLAY
SETUP SCREEN
Memory slot Battery type Function mode Cell number
M01 LIPO
5000mAh
Battery capacity mAh
CHARGE SCREEN
Function mode Charge time Charged capacity mAh
CHG 12:59
LP 4.97A
Battery type Actual current
By pressing the SET/MODE key you can display extra
information:
 Individual cell voltage (only for LiPo/LiFe)
 Input and output voltage (supply and battery voltage)
10 - English
CHG 2S
C=5.0A
Charge current
1055
8.037V
Battery voltage

POWER SUPPLY

WARNING! Never connect the charger simulta-
a
neously to an AC and DC power source. Use only
a compatible and reliable power source. Never
connect the charger to AC power with the DC power
cord still connected to the charger. Do not leave
the charger without supervision while it is powered
on. Always disconnect the charger from the power
source when not in use. Power supply issues can
cause the charger to malfunction and cause fire,
damage to the product, to personal property and
cause serious injury.
The charger can be powered from an AC power source
such as mains power outlet or a DC power source such as
a car battery. Only use one type of power source at a time.
AC power source: connect the AC power cord plug into a
100-240VAC power source such as a mains power outlet.
Only connect to an outlet which is compatible with the
power cord plug type.
DC power source: plug the DC power cord into the DC
power connector located at the back of the charger.
Connect the crocodile clips to a 11-15VDC/6A min. power
source. Respect polarities, red is positive + and black is
negative -. Make sure that the connection is reliable.
Team Orion Advantage ONE 406