CMi 400894 Original-Gebrauchsanweisung Seite 44

400894.book Seite 44 Freitag, 17. Mai 2013 12:40 12
GB
Symbols on the product
Read instructions for use
before use. Please observe
all information contained, in
particular the safety
instructions.
Caution with rotating blades.
Do not place your hands and
feet in the opening when the
product is running.
Do not expose the product to
a humid environment. The
storage location must be dry.
Wear safety gloves!
Keep third parties away
when working with the
product.
Wear eye, ear and head
protection, protective gloves,
sturdy shoes and long
trousers.
Wear sturdy shoes when
working with the product.
Electrical safety
• The connector plug on the product must
fit into the socket. No not make any
modifications to the plug. Do not use
earthed electrical tools in conjunction
with an adapter. 
Unmodified plugs and suitable sockets
reduce the risk of electric shock.
• Avoid physical contact with grounded
surfaces, such as pipes, radiators,
cookers and refrigerators. The risk of
electric shock increases if your body is
earthed.
44
• Keep electrical tools away from rain and
wet.
The risk of electric shock increases if
water penetrates an electrical tool.
• Switch off the product and pull out the
plug if the power supply is interrupted.
This prevents the unintentional use of the
use in case of voltage return.
• In the event of a power interruption, and
each time you set the product aside,
check whether the locking knob is
unlocked and unlock if necessary.
Otherwise, the product may inadvertently
start up when the power supply is
restored.
• Do not use the cable to carry the product,
hang it up or pull the plug out of the
socket. Keep the cable away from heat,
oil, sharp edges and any moving machine
parts. 
Damaged or tangled cables increase the
risk of electric shock.
• If the connecting cable becomes
damaged, it must be replaced by an
expert.
• If you require to work with an extension
cable, this must be approved for this
application field and must have sufficient
cross-section. Otherwise a power loss on
the device and overheating of the cable
may occur. If you are not certain, contact
a specialist.
• If you use an electrical tool outdoors, use
only extension cables suitable for
outdoor use. 
Using an extension cable that is suitable
for outdoor use reduces the risk of
electric shock.
• When operating the electrical tool in a
damp environment cannot be avoided,
use a fault current circuit breaker with a
trip current of 30 mA or less. The use of a
fault current circuit breaker reduces the
risk of electric shock.