Intended Use; Assembly And Adjustments - DeWalt DW040 Bersetzt Von Den Originalanweisungen

EN G LI S H

INTENDED USE

Your LDM has been designed for measuring distance, area and
volume.
DO NOT use under wet conditions or in presence of flammable liquids
or gases.
The LDM is a professional tool. DO NOT let children come into contact
with the tool. Supervision is required when inexperienced operators use
this tool.
Unpacking
FITTING THE WARNING LABEL
The safety warnings on the label shown on the laser must be
formulated in the language of the user. For that purpose, a separate
sheet of self-adhesive labels has been supplied with the tool.
WARNING: Check that the safety warnings on the label
have been formulated in your language.
The warnings should read as follows:
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
• If the warnings are in a foreign language,
proceed as follows:
– Remove the required label from the sheet.
– Carefully place the label over the existing label.
– Press the label in place.

ASSEMBLY AND ADJUSTMENTS

WARNING! Do not place the laser in a position which
may cause anyone to intentionally or unintentionally
stare into the laser beam. Serious eye injury may result
from staring at the beam.
46