Inserting Batteries - Hama 00057276 Kurzanleitung

00057277bda 06.03.2006
L L Wireless Portable Mouse
1. Package contains:
' Wireless optical 4 button notebook mouse
' Mini USB receiver
' Two AA batteries
' Software CD-ROM
' Quick guide
2. Installing the Hardware:

2.1 Inserting Batteries

a) Press the battery compartment button and pull the battery cover back at the same time (fig. 1)
b) Insert the two AA batteries into the battery compartment in the correct direction.
The poles are indicated there.
c) Set the ON-OFF switch on the base of the mouse to "ON".
2.2 Connecting the Mini USB Receiver
a) Connect the mini USB receiver to a free USB port on the PC.
The mouse now works as a standard 3-button mouse.
The software supplied must be installed to assign
specific functions to the 3rd (wheel) button
and the 4th mouse button.
3. Installing the Software
- The software supports Windows 98SE/2000/ME and XP.
- Uninstall any mouse software already installed.
a) Place the enclosed CD in your CD-ROM or DVD-ROM drive. Wait a moment, installation is started
automatically. If it does not start automatically, click Start => Run, enter "X:\Setup" (where "X" is
the drive letter of your CD-ROM drive) and press Enter to confirm.
b) Select the required language and click "Next".
c) Restart your PC to complete installation.
d) After installation is complete, the mouse symbol appears
Note:
-During installation under Windows XP, a message may appear regarding an unsigned driver.
This does not affect mouse or software operation. Simply ignore and continue with the installation
process.
9:45 Uhr Seite 7
(fig. 1)
in the task bar.
5