Werbung
Verfügbare Sprachen
Verfügbare Sprachen
00057277bda
06.03.2006
6. Re-connecting the mouse and receiver (ID setting)
The mouse and receiver must be re-connected if interferences occur during operation due to other
radio mice or keyboards.
Proceed as follows to do so:
a) Switch on your PC
b) Press the ID button on the receiver. The LED flashes slowly. The receiver is now ready to
synchronise the mouse automatically.
c) Press the ID button at the base of the mouse (this button is labelled "Connect").
d) The LED on the receiver lights continuously after the synchronisation process has been
completed successfully. The LED flashes when the mouse is moved.
7. Other Information
Batteries
- Note! If swallowed, batteries can be lethal. Keep batteries out of reach of children.
If a battery is swallowed, seek medical assistance immediately.
- Batteries may not be charged or reactivated with other means, dismantled, disposed of in a fire
or short-circuited.
- Remove the batteries if the mouse is not to be used for an extended period. Otherwise the
batteries could leak and damage the mouse.
Disposal
Batteries must be disposed of properly. For this purpose, there are containers for
batteries in stores which sell batteries and in municipal waste disposal areas.
9:45 Uhr
Seite 9
7
Werbung
