Bosch SCT Serie Prüfbuch Seite 48

en en 48 | SCT / CCT / EL | Maintenance SCT 141x
Checklist for SCT 415/SCT 416/ EL 52425
Setting
Pitch angle
Roll angle
Rotation around vertical axis for laser module
Alignment of the measurement boards
Lateral positioning of the test boards
Height adjustment
Accuracy of the height adjustment
Yaw angle
Maintenance of entire unit
Roll angle and pitch angle of the precision measuring bar che-
cked?
Roll angle spirit level on L-bracket checked?
Pitch angle spirit angle on L-bracket checked?
Pitch angle on the slides checked?
Yaw angle an SCT 416 / CCT 3500 checked?
Component maintenance
P-Assist S5 1 690 381 124 / 1 690 381 174 checked?
Laser beam length of P-Assist S5 checked?
Laser beam thickness of P-Assist S5 checked?
Play of the P-Assist S5 checked?
P-Assist S5 in laser mount A checked?
P-Assist S5 in laser mount B checked?
P-Assist S5 for rotation checked?
Precision measuring bar checked?
L-bracket checked?
Slides on the precision measuring bar checked?
Post checked?
Slide on the post checked?
Base plate checked?
Positioning unit for front axle
Positioning unit for rear axle
Adjustment beam checked?
Reference boards checked?
Measurement board 1690382xxx checked?
Alignment lasers checked?
Date Tester's name
|
1 690 386 058 2018-01-30
Yes No
Yes No
Company Test location
Target value
+/- 0.5°
+/- 0.3°
+/- 0.15°
+/- 1.5 mm
+/- 4 mm
+/- 800 - 1500 mm
+/- 5 mm
+/- 0.2°
Test result / comments
Test result / comments
Signature
Robert Bosch GmbH