Maintenance And Care - Westfalia 92 86 38 Originalanleitung

Intended Use
 The air blow gun is intended for cleaning and blowing out material from
objects and difficult to access places.
 The intended use also includes an operation following the operating
instructions.
 Any use beyond these parameters (different media, applying force) or
any changes (reconstruction, no original accessory) can lead to serious
risks and is regarded as use that is contrary to the intended purpose.
Before first Use
Unpack the air blow gun and check all parts for any damage in transit.
Dispose of packaging materials or store them out of reach of children.
There is risk of suffocation!
Start-up
1. Screw the desired blow out nozzle (1a, 1b or 1c) on the air outlet
opening.
2. Power up the compressed air generator.
3. Press the trigger (2) to start the delivery of air.
The more you press the trigger, the higher the
air output rate will be. Release the trigger to
stop the delivery of air.
4. After work disconnect the air tool from the
compressed air supply.
5. Depending on the work, use either the plug
nipple (4) or the hose nozzle (5). Mount the
hose nozzle (5) onto the compressed air
connection (3) using the lock nut (6), as shown
in the picture on the right.
Air Pressure and Air Volume
 The air blow gun requires clean and oil-free air. Therefore, do not use
an oil-fog lubricator within the air supply system.

Maintenance and Care

9