Chicco MR. PARTY Gebrauchsanleitung Seite 14

Booster seat
GB
MR. PARTY
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY
TO GUARANTEE YOUR CHILD'S SAFETY AT ALL TIMES.
KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
WARNING: BEFORE USE, REMOVE AND DISPOSE OF
ALL PLASTIC BAGS AND PACKAGING MATERIALS AND
KEEP THEM OUT OF REACH OF CHILDREN.
WARNINGS
• WARNING! Do not leave children unsupervised in
this booster seat.
• Always fix the booster seat to a chair using the two
safety straps.
• WARNING! After fitting the booster always ensure
that it is safely fixed to the chair.
• WARNING! Do not use on a stool, an unstable chair,
a folding chair
• WARNING!To be used exclusively on a chair with
seat dimensions greater than those of the booster
seat
• WARNING! The booster seat is not suitable for
children who cannot sit unaided.
• WARNING! Do not seat more than one child at a
time in the booster seat.
• WARNING!Not suitable for children under 18
months
• WARNING!Verify that the floor is plan and the
stability of the chair before installing the booster
seat.
• Do not let other children play unattended close to the
booster seat.
• WARNING! Do not use the booster seat if any
components are broken or missing.
• Do not use replacement parts other than those
approved by the manufacturer or distributor.
• WARNING! Always use the safety harness.
• WARNING! Do not use the booster seat in such a
way that the child could push its feet against parts
of the table, other chairs or structures, and overturn
the chair with the booster seat fitted to it.
COMPONENTS:
A - Backrest
B - Seat
C - Safety harness
D - Rear fixing straps
E- Lower fixing straps
F - Baby food container
G - Removable tray
H - Buttons for fitting the tray
I - Height adjustable legs
L - Height adjustment unlock device
M- Compartment for storing the baby food container
N- Button for releasing the backrest.
CLEANING AND MAINTENANCE ADVICE:
All cleaning and maintenance operations must only be
carried out by an adult.
Periodically check the booster seat for wear, damage,
or missing components. Should any parts be missing
or damaged, the booster must not, under any
circumstances, be used.
Clean the plastic parts with a damp cloth.
The tray can be cleaned in a dishwasher.
The baby food container can be cleaned in a
dishwasher.
The baby food container is microwave oven safe.
WARNING! Always remove the lid before placing the
container in a microwave oven.
The fabric parts can be washed.
HOW TO FIT THE BOOSTER SEAT:
1. Unfasten the lower fixing straps (E), as shown in
diagram 1.
2. Release the tray from the booster seat, levering the
side handles as shown in diagram 2.
3. Remove the food container (F) from the compartment
located at the rear of the backrest (M), as shown in
diagram 3.
Raise the backrest (A), as shown in diagram 3a, and
lock it in a vertical position pushing in a downward
direction as shown in diagram 3b. A "click" will be heard,
indicating that it is locked in the correct position.
4. T he booster seat can be adjusted to 3 different heights.
To select the desired height, proceed as follows.
5. Turn the booster seat upside down, as shown in
diagram 4. To adjust the leg, pull the unlock levers (L),
located at the bottom of the seat, sliding them towards
the centre as shown in diagram 5.
6. It is now possible to adjust the height of the leg (I),
raising or lowering it to 3 different positions (diagram
6).
7. After selecting the desired height, release the levers to
safely lock the leg into position (diagram 7).
Repeat the same operation to adjust the height of the
other leg.
WARNING! Always ensure that both legs are adjusted
to the same height to avoid affecting the stability of the
booster seat.
8. Position the booster on a chair (diagram 8).
9. Fasten the rear fixing straps D, passing them behind
the backrest of the chair as shown in diagram 9; then
fasten the lower fixing straps E, passing them around the
seat as shown in diagram 10. Ensure that a click is heard,
indicating that they are fixed correctly into position.
10. Pull the free end of straps D and E to adjust their
length, in such a way that they are well tensioned and
the booster seat is safely fixed into position (diagram
11).
11. Once the booster is fitted to the chair, the child can
be seated as follows:
a. Unfasten the three-point harness, as shown in
diagram 12.
b. Place the child in the booster seat, restraining it with
14