5.2.x.5 Service IP
Input IP address of the modulator
Default: 192.168.002.137
5.2.x.6 Subnet Mask:
Default: 255.255.255.000
5.2.x.7 Gateway:
Default: 192.168.002.000
5.2.x.8 Protocol:
Default: UDP
6. System
6.1 Save config /
Select: „Yes" or „No"
6.2 Load saved CFG
Select: „Yes" or „No".
6.3 Factory reset
Select: „Yes" or „No".
Attention: After a reset, the output parameters must be set to the standard
values according to the operating instructions.
6.4 LCD timeout
Select: 5s, 10s, 30s, 45s, 60s, 90s, 120s.
Default: 30s
6.5 Version
Software and hardware version
All manuals and user guides at all-guides.com
5.2.x.5 Service IP
5.2.x.6 Subnet Mask
5.2.x.7 Gateway
5.2.x.8 Protocol
29