Wiring Diagram - Helios AIR1-BE ECO Montage- Und Betriebsvorschrift

Operating instructions
CHAPTER 3
INSTALLATION
AND OPERATION
CHAPTER 4

WIRING DIAGRAM

m
DANGER
Controller AIR1-BE ECO
3.0 Installation
When using magnet strap connectors, the cable should be routed through the alternati-
ve outlet at the bottom of the wiring compartment. Open the cover for this purpose. Turn
the cover 180° and block the side outlet. Then re-mount the cover.
3.1 Controller overview
The system is operated via seven buttons.
Display alarms
Left
Confirm selection
Cancel
3.2 LED functions
The LEDs have the following functions:
Symbol Function
There are one or more unacknowledged alarm(s)
There are one or more remaining acknowledged
alarm(s)
Dialogue box; Setting options after clicking OK
Modification mode
4.0 Connection/wiring diagram
The electrical connection is displayed in the installation and operating instructions for the
AIR1 unit.
2 2
Fig.1
Fig.2
Red LED
Yellow LED
Up
Right
Down
Colour
Red (flashing)
Red (constant)
Yellow (flashing)
Yellow (constant)
EN