NARDA ADFA Handhabung Seite 50

4. Mount the adapter with the ADFA to the tripod head:
The dark gray lever of the tripod head should still point open to the side.
If not, unlock the coupling by releasing the silver latch and push the lever
to the side. You can now snap the adapter into the tripod head.
CAUTION! The ADFA is heavy. Be careful when mounting the ADFA on
the tripod.
5. If required, adjust the antenna horizontally by rotating the ADFA in the
tripod head. You may need to slightly release the lever (as well as the
latch) to rotate the adapter.
6. Connect the RF cable to the basic unit.
Demounting the ADFA from the tripod
1. Disconnect the RF cable from the basic unit.
2. Unlock the quick-release coupling by releasing the small silver latch and
pushing the dark gray lever to the side. In this position, the lever is
blocked and you can now remove the adapter with the ADFA from the
tripod head.
CAUTION! The antenna is heavy. Be careful when taking off the ADFA
from the tripod.
50 Automatic DF Antenna Narda