Unpacking; Packaging; Package Contents; Checking The Device For Shipping Damage - NARDA ADFA Handhabung

3

Unpacking

3.1

Packaging

The packaging is designed to be re-used as long as it has not been
damaged during previous shipping. Please keep the original packaging and
use it again whenever the device is shipped.
Figure 1: Package with an ADFA and RF cable already connected.
3.2

Package contents

The package contents are listed on the delivery note. Please check that you
have received all the items listed. Contact your supplier if anything is
missing.
3.3

Checking the device for shipping damage

After unpacking, check the device and all accessories for any damage that
may have occurred during shipping. Damage may have occurred if the
packaging itself has been clearly damaged. Do not attempt to use a device
that has been damaged.
3.4

Recovery after shipping and storage

Condensation can form on a device that has been stored or shipped at a
low temperature when it is brought into a warmer environment. To prevent
damage, wait until all condensation on the surface of the device has
evaporated. The device is not ready for use until it has reached a
temperature that is within the guaranteed operating range. For temperature
ranges see the corresponding datasheets.
40 Automatic DF Antenna Narda