NARDA ADFA Handhabung Seite 44

6. Close the metal lid and fasten all 6 screws (see Figure 4).
Using the wrong cable outlets
The cables can be damaged when not routed
through the outlets properly.
 Pay attention to the different cable outlet sizes
and route the cables through the outlets
properly.
Operating the ADFA
The first time the ADFA is connected to the basic unit (SignalShark) and
switched on, the ADFA downloads reference data, which usually takes a
few seconds. Leave some time for the download to complete.
For detailed information about how to the operate the ADFA and an applica-
tion example, refer to the SignalShark online help.
44
NOTICE
Automatic DF Antenna Narda