NARDA ADFA Handhabung Seite 46

Ferrit cores of the RF cable
The ferrite cores of the RF cable may scratch the painting on your
vehicle roof.
 It is recommended that you insert the RF cable into a foamed cable
guard before mounting the ADFA on the vehicle roof.
3. Place the ADFA with the magnetic mount adapter near the center of the
vehicle roof.
CAUTION! The ADFA is heavy. Be careful when mounting the ADFA on
the vehicle roof.
4. Align the arrow marked on the radom in the direction of travel.
NOTE: It is very important that the arrow is aligned as accurately as possible!
Pushing around the magnetic mount adapter
Pushing around the magnetic mount adapter may scratch the roof.
 Do not push around the placed magnetic mount adapter.
 To change the position, lift the magnetic mount adapter starting at one
corner by pulling on one of the handles. After the magnetic mount
adapter has come loose, you can move it to the desired position.
46
NOTICE
NOTICE
Automatic DF Antenna Narda