Establishing A Connection To A Network; Manual Config; Wlan Connection Via Wps - Medion LIFE P85003 Bedienungsanleitung

7.3.2. Establishing a connection to a network

The names (SSID) of the networks found are shown in a list. WLAN Access Points
that provide connections via WPA are indicated with [WPS].
Beneath this, you will see:
RESCAN: start a new search
MANUAL CONFIG: enter connection data manually
 Then turn the VOLUME OK controller on the device or press the correspond-
ing navigation buttons on the remote control
cess Point for connection with the internet radio. Press the VOLUME OK con-
troller on the device or OK on the remote control to confirm your selection.
In case of an unencrypted (open) WLAN Access Point, the internet radio establishes
the connection automatically.
 To connect with an encrypted network, observe the following sections.

WLAN connection via WPS

Once a WLAN network providing the option to connect via WPS has been selected,
the WPS menu appears. If you do not want to establish a connection via WPS, select
SKIP WPS here.
WPS button
 Select PUSH BUTTON to enable the WPS function to be used via the router's
WPS button.
 Then press the WPS button on the router and press OK to confirm the connec-
tion with the internet radio.
You can also access the WPS function at any time
ing the INFO button.
To this end, please also note the information in your router's user man-
ual.
• The device will now establish a connection with the network. Once the connec-
tion is successful, a corresponding notice is then displayed.
• The device can now play back media via the network and receive internet radio
stations as long as there is an active internet connection via the network.
• The device stores the connection data so that it does not need to be re-entered
to re-establish the connection.
1 In internet radio mode, you can only use the WPS function via the set-up wizard.
to select the WLAN Ac-
1
by pressing and hold-
DE
FR
NL
ES
IT
EN
265