Troubleshooting - ZANKER ZKF680 Benutzerinformation

Troubleshooting

Problem
There is no spark when lighting the
gas
The flame is blow out immediately
after ignition
The gas ring burns unevenly
20
Possible cause
• There is no electrical supply
• Burner cap and crown are
placed uneven
• Thermocouple is not heated suf-
ficient
• Burner crown is blocked with
food residues
Remedy
• Make sure that the unit is con-
nected and the electrical supply
is switched on.
• Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
• Make sure that the burner cap
and crown are in correct posi-
tions.
• After lightning the flame, keep
the knob pushed for approxi-
mately 5 seconds.
• Make sure that the injector is not
blocked and the burner crown is
clear of food particles.