The Microwave Can Be Fitted In Position A, B, C Or D; Installing The Appliance; Installation - AEG MW17E10M Benutzerhandbuch

122
www.aeg.com

9. INSTALLATION

The microwave can be fitted in
position A, B, C or D:
9.1 Installing the appliance
4 mm
Measurements in (mm)
1. Remove all packaging and check
2. This oven is designed to fit into a
4 mm
4 mm
3. Fit the fixing hooks to the kitchen
4. Fit the appliance into the kitchen
5. Ensure the appliance is stable and not
Niche size
Position
W
A 560 x 550 x 360
B+C 560 x 300 x 350
560 x 300 x 360
D 560 x 500 x 350
560 x 500 x 360
carefully for any signs of damage.
360 mm high cupboard as standard.
When fitting into a 350 mm high
cupboard:- Unscrew and remove the 4
feet from the bottom of the oven. There
are 3 tall feet and 1 short foot. Replace
the 3 tall feet with those provided in the
accessory pack. Do not replace the
short foot.
cupboard using the instruction sheet
and template supplied.
cupboard slowly, and without force.
The appliance should be lifted onto the
fixing hooks and then lowered into
place. In the case of interference during
fitting, this hook is reversible. The front
frame of the oven should seal against
the front opening of the cupboard.
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and
the top of the frame (see diagram).
D H