sylvac Hi_Gage ONE Smart Bedienungsanleitung Seite 18

8. Customising the instrument (favourite key)
E
The «favourite» key
the needs of the user. In order to assign a function to the «favourite» key, give a prolonged (>2s) press on
, and then select the required function:
2
Validation of selection: By a prolonged press on
Note :
- A function can also be assigned via RS232 using the command <FCT + Function No.> (FCT 0..8)
example : Toggle unit = <FCT5>.
gives direct access to a predefined function, and can be configured according to
Data transmission
3
(default)
Hold display 4 bt
REF1 - REF2 - AUTO
Recall Preset
Bluetooth® ON-OFF
(depending on model)
mm - IN
or a short press on or
SET
18
Measurement sense,
positive - negative
Switching between
7
surface mode and
diameter / groove mode
8 no. F
No function
.
MODE