In order to avoid fire risk, wherever possible, ensure
that the appliance is not in contact with walls or with
any hot element (compressor, condenser). Observe the
installation recommendations.
The appliance should not be placed close to radiators
or cooking hot plates or gas rings.
Check that electrical sockets remain accessible when
the appliance is installed.
When positioning the appliance, ensure the supply cord
is not trapped or damaged.
Power saving
To limit the electricity consumption of your appliance:
Install it in an appropriate place (see "Installation
instructions").
Leave the doors open as little time as possible.
To ensure that the appliance operates properly, clean
the condenser regularly (see "Maintenance").
Regularly inspect the door seals and ensure that they
are still closing properly. If this is not the case, contact
your after-sales service.
Trouble shooting
Any electrical work should be carried out by a qualified
and skilled technician.
55