Pulse Generators/Encoders; Installation And Commissioning; Scope Of Delivery - Honeywell TRZ2 Betriebsanleitung

2.5 Pulse generators/Encoders

The meter may be fitted with the following pulse generators or encoders:
Device type:
Low-frequency pulse generator (LF)
Low-frequency pulse generator (LF)
Low-frequency pulse generator (LF)
High-frequency pulse generator (HF)
High-frequency pulse generator (HF)
Encoder
Table 3 | Overview of pulse generators
Further information on the pulse generators and encoders is provided in
the separate instruction manuals.

3. Installation and commissioning

 INFORMATION!
Check the packing list to ensure that you have received your
complete order. Check the type labels to ensure that the device
supplied is the one you ordered.
 INFORMATION!
Check the packaging carefully for signs of damage or signs that
the device has been handled incorrectly. Report any damage to the
forwarding agent and to the local representative of the
manufacturer.
 INFORMATION!
The installation material and tools are not supplied with the device.
Use installation material and tools which comply with current
health and safety regulations.

3.1 Scope of delivery

 Ordered measuring instrument
 Instruction manual
 Product documentation
 Oil – Shell Risella 917, Shell Catenex T121 or Klüber ISOFLEX PDP 38
(for meters lubricated with oil)
 Optional accessories depending on the purchase order
 Optional: calibration certificate
73018696f © Elster GmbH | All rights reserved. Subject to modification
Manufacturer: Device designation:
Elster GmbH IN-Sxx
Elster GmbH IN-Cxx
Elster GmbH Sxx-Rx
IFM N95000 (A1S)
Pepperl & Fuchs NJ (A1R)
Elster GmbH ENCODER S1
Honeywell
19