Intended Use; Approvals And Certifications - Honeywell TRZ2 Betriebsanleitung

Honeywell

1.1 Intended use

 CAUTION!
Responsibility for the use of the meter in terms of suitability,
intended use and the corrosion resistance of the materials to the
medium is solely in the hands of the operator.
 INFORMATION!
The manufacturer shall not be liable for damage caused by
improper or inappropriate use.

1.2 Approvals and certifications*

CE marking / EU declaration of conformity
The manufacturer certifies conformity with the EU
declaration of conformity and by attaching the CE marking.
The
requirements of the relevant EU Directives.
Comprehensive
Directives
certifications, is contained in the EU declaration of
conformity.
The EU declaration of conformity is included in the delivery
and is also available to download at www.docuthek.com.
ATEX/IECEx
 DANGER!
The turbine gas meters and quantometers are suitable for
use in Zone 1 hazardous areas and are approved with the
following
declaration (ATEX):
II 2G Ex h IIC T4 Gb
IECEx TUR 16.0043x
8000310657
* The marking on the device shall be applicable.
10
measuring instrument
information
and Standards,
 See chapter 5.3 Approvals and Annex A –
Standards and Norms, for details of other
approvals and Directives.
certification
73018696f
meets
on the
as well
(IECEx) and
(IECEx) TÜV Rheinland Industrieservice GmbH
Am Grauen Stein | 51105 Köln | Germany
TÜV Nord AG
(ATEX)
Am TÜV 1 | 30519 Hannover | Germany
© Elster GmbH | All rights reserved. Subject to modification
the statutory
applicable EU
as recognized
manufacturer's