Conversion Of Electric Pre-Heater (Accessories) To Left-Hand Version - Helios KWL EC 220 D Eco R Montage- Und Betriebsvorschrift

Installation and Operating Instructions
EN
Compact ceiling units KWL EC 220 D Eco
3 .1 .3 Conversion of the electric pre-heater (accessories) to left-hand version
1. Remove the electric pre-heater (accessories) from the packaging for the conversion.
2. Loosen the fastening screw of the heater element (Fig.8).
3. Remove heating element (Fig.9) and turn by180°
4. Fix the pre-heater in the housing in this position (Fig.10)
5. Tighten the fastening screw of the heater element! (Fig.11)
5. Insert the electric pre-heater up to the stop in the unit (Fig.12) and screw to cover (Fig.13) .
6. Connect electrical plug connection.
7. Insert extract air filter up to the stop in the unit.
Fig .8
Fig .10
Fig .12
L
Do not lay the cable on the heating element!
Fig .14
6
Turn heating element by 180°,
see Fig.10
Fig .9
Fig .11
Fig .13
Fig .15