Safety Information - Detax PERMALINER Gebrauchsanweisung

►
F lask placed in hot – rather than cold – water bath.
►
P acking of PERMALINER before the acrylic is stiff enough.
► W etting of the acrylic with monomer liquid before application of PERMALINER.
2. Insufficient or no bonding:
►
P rosthetic base plate not roughened deeply enough.
►
T he denture was wetted with alginate insulation.
►
H ands and denture were not grease-free.
►
E xcessive heat build-up during trimming can cause PERMALINER to peel off at the borders.
Recommendations for repairing PERMALINER
►
P ERMALINER can be repaired and supplemented with itself. Invest the denture for this purpose.
Roughen existing PERMALINER and plastic material well. For supplementation in the repair area, place
new PERMALINER in the flask and press (trial pressing with foil possible). Then polymerize according to
instructions.

Safety Information

►
O nly for the specified intended use by trained specialists.
EN
| 17