Detax PERMALINER Gebrauchsanweisung Seite 13

Relining of new dentures with PERMALINER
Plaster cast
►
F irst, a class 3 plaster model is manufactured.
Spacer
►
T he spacer is ideally produced by deep drawing. Its thickness should be between 1 mm and 3 mm;
it is determined by the dentist. The spacer can also be made with cold-curing polymer, e.g. from tray
| 13
material, and trimmed to the desired thickness.
Investing
►
I nvest the wax pattern with spacer in a flask for the press technique. Insulation of the teeth in the counter
with FLEXISTONE® or FLEXISTONE® Plus is recommended. Place the flask in boiling water for approx. 4
minutes, then open and remove all traces of wax carefully. Remove spacer first.
Insulation
►
A pply conventional alginate insulation. The return the spacer to its position.
EN