Detax PERMALINER Gebrauchsanweisung Seite 16

Lustrol is suitable for use in combination with Molloplast® B, Permaliner, mollosil®, and mollosil® plus.
Relining of an existing acrylic denture with PERMALINER
►
I n the case of an existing denture that is to be constantly softly relined with PERMALINER the dentist makes
a new impression of the base with the existing denture. Medium- or light-bodied impression materials are
used for producing the impression. Model fabrication, investing and insulation are carried out as described
above.
The acrylic base
►
T ake the denture from the counter and remove the impression material from the denture. Reduce the base
with milling by the desired Permaplast thickness (1.0–3.0 mm). For a seamless transition from acrylic to
PERMALINER it is recommendable to cut an even circular shoulder in the transition area into the acrylic in
the desired Permaplast thickness. Completely remove any existing soft relining material.
►
P acking, pressing, polymerizing and trimming of PERMALINER are carried out as described above.
Recommendations to avoid incorrect processing
1. Blistering:
►
I nsufficient pressure during pressing.
16 |