Operation And Function - Vestfrost WFG46 Bedienungsanleitung

Operation and function

To control the inner light on/off.
Indicator light illuminates to signify the
cooling mode is currently in operation.
To control this appliance, turn on/off
(press and hold this button for
3 seconds)
Press once the "UP" button, the
temperature will raise 1°C
Press once the "DOWN" button, the
temperature will lower 1°C
Flashing indication = Cabinet Temperature.
Steady indication = Set Temperature.
Setting the Temperature Con-
trols
● The temperature range +5 to +18°C
When the system enter the set up tempera-
ture. Each press once the
the temperature setting will increase or
lower 1°C,When the temperature set-
ting reach the upper limit 18°C and lower
limit 5°C, the temperature setting will not
increase or lower.
If you want to know the actual temperature-
please press up or down for 3 seconds,
display panel will show actual temperature.
After 5 seconds, it will show the setting
temperature.
Alarms
If the temperature is higher than 23°C,
The "HI" is shown in display, the alarm will
sound after one hour and the reason must
be controllede.If the temperature is lower
than 0°C the "LO" is shown in display, and
the buzzer alarm and the malfunction indi-
cator light at the same time.
9
GB
fig. 5
or button,