Philips OneBlade Pro QP6520 Bedienungsanleitung Seite 15

Problem
I cannot switch on
the appliance when
it is connected to
the mains.
The appliance does
not work anymore.
The appliance
does not cut hairs
anymore.
The appliance makes
a strange noise.
The appliance
does not function
optimally anymore.
Possible cause
You cannot use the
appliance when it is
charging. You can only use
the appliance without cord.
The rechargeable battery
is empty.
The blade is blocked by dirt. Switch on the appliance and rinse the blade under
Travel lock is activated.
The blade is placed on the
handle incorrectly.
The blade is damaged or
worn.
The blade is damaged or
worn.
The blade is placed onto
the handle incorrectly.
The blade is blocked by dirt. Remove the blade and clean the blade thoroughly.
The blade is blocked by dirt. Remove the blade and clean the blade thoroughly.
The blade is subject to
wear and therefore its
performance decreases
over time.
The blade is a delicate
part of the appliance and
can easily be damaged.
If the blade is damaged,
it may not function
optimally anymore.
Solution
Disconnect the appliance from the mains before use.
Charge the appliance (see chapter 'Charging').
During charging, the battery charge indicator flashes
white. If the battery charge indicator does not flash,
check whether there is a power failure or if the wall
socket is live. If there is no power failure and the
wall socket is live but the battery charge indicator
still does not flash, take the appliance to your dealer
or a Philips service centre.
the tap with warm water.
Hold the blade in a cup with warm water
(60°C and not hotter) for approx.30 seconds.
Press the on/off button for 3 seconds to deactivate
travel lock.While you deactivate the travel lock, the
display counts down. Then the travel lock symbol
lights up and switches off.The appliance is now
ready for use again.
Push the blade onto the appliance until you hear a click.
Replace the blade with a new one. See chapter
'Replacement'.
Replace the blade with a new one. See chapter
'Replacement'.
Remove and reattach the blade. Push it onto the
appliance until you hear a click.
Replace the blade with a new one. See chapter
'Replacement'.
Replace the blade with a new one. See chapter
'Replacement'.
ENGLISH
15