Specifications - Powerworks PD60LT Bedienungsanleitung

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET

SPECIFICATIONS

Voltage
No load speed
Cutting head
Cutting Line Diameter
Cutting Path
Diameter
Battery pack
Charger
Weight with battery
pack
Measuered sound
pressure level
Measuered sound
power level
Guaranteed sound
power level
Vibration
The vibration emission during actual use of the power
tool can differ from the declared total value depending
on the ways in which the tool is used; avoid vibration risk
suggestion: Wear glove during operation limit operating
time and shorten trigger time.
DESCRIPTION
1. Switch trigger
2. Rear handle
3. Lock-out trigger
4. Front handle
5. Upper shaft
6. Shaft coupler
7. Lower shaft
8. Grass deflector
9. Edge guide
10. Cut-off blade
English (original instructions)
60 volts
6200 (±10%) RPM
Bump feed
2.0 mm
356 mm
2907407, 2907507
2907607
9 lbs (4.1 kg)
L =67.6 dB(A), K =4.9
PA PA
dB(A)
L =87.6 dB(A), K =4.9
WA PA
dB(A)
L =96 dB(A)
WA
7.31 m/s 2 , k=1.5 m/s 2
WARNING
ASSEMBLY
UNPACKING
This product requires assembly.
„ Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
„ Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
„ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
ATTACHING THE EDGE GUIDE See Figure 2.
„ The edge guide can limit the cutting range of the cutting
line and reduce the risk of the rotating cutting line
causing damage.
„ To use the edge guide, press the edge guide onto the
trimmer head.
1
WARNING
WARNING
WARNING
WARNING