Setup; Setup 1: Connect A Computer Equipped With The Dvi Output Connector; (Digital Rgb); Setup 2: Connect A Computer Equipped With The Hd15 Output - Sony SDM-X52 Bedienungsanleitung

Setup

Before using your monitor, check that the following items are
included in your carton:
• LCD display
• Power cord
• HD15-HD15 video signal cable (analog RGB)
• DVI-D video signal cable (digital RGB)
• Audio cord (stereo miniplug)
• Windows Utility/Macintosh Utility Disk
• Warranty card
• This instruction manual
Setup 1: Connect a computer
equipped with the DVI
output connector (digital
RGB)
• Turn off the monitor and computer before connecting.
• When connecting the computer to the monitor's HD15
input connector (analog RGB), refer to "Setup 2:
Connect a computer equipped with the HD15 output

connector (analog RGB)."

Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
1
Remove the back cover.
2
Using the supplied DVI-D video signal cable (digital
RGB), connect the computer to the monitor's DVI-D
input connector (digital RGB) for INPUT1.
to the computer's DVI output
connector (digital RGB)
Setup 2: Connect a computer
equipped with the HD15
output connector (analog
RGB)
Turn off the monitor and computer before connecting.
Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
1
Remove the back cover.
to the DVI-D input
connector (digital RGB)
for INPUT1
DVI-D video signal
cable (digital RGB)
(supplied)
(continued)
7
GB