Picture Menu - Sony SDM-G76X Handbuch

x Controlling the monitor by computer
Press the MENU button down for at least 5 seconds. You will see
an on-screen message indicating the current setting. After 3
seconds the DDC/CI setting is switched on or off, as shown
below.
On-screen messages
(Appear for a while)
DDC-CI : ON
(default setting)
DDC-CI : OFF
Note
This function applies only to computers that support the DDC/CI (Display
Data Channel Command Interface) function.

PICTURE menu

You can adjust the following items using PICTURE menu.
• MODE
(GAME/MOVIE/PC/USER)
• BACKLIGHT
• CONTRAST 6
• BRIGHTNESS
• COLOR
• GAMMA
• SHARPNESS
• MODE RESET 0
x MODE menu
You can select the appropriate screen brightness for your purpose.
The PICTURE settings can be set for each mode.
The changed setting is automatically applied for each input
(INPUT1/INPUT2).
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M button to select
press the OK button.
The PICTURE menu appears on the screen.
3 Press the m/M button to select MOVIE and press the
OK button.
The MODE menu appears on the screen.
M O D E
G A M E
M OV I E
P C
U S E R
1 2 8 0
4 Press the m/M button to select the desired mode and
press the OK button.
The default setting is MOVIE.
• GAME: Bright picture.
• MOVIE: Clear picture with strong contrast.
• PC:
Soft tone picture.
Allows the computer to control
menu settings.
Does not allow the computer to
control menu settings.
P C T U R E I
M O V I E
: 1 0 0
6 : 7 0
: 5 0
1 2 8 0 x 1 0 2 4 / 6 0 H z
E X I T
(PICTURE) and
x 1 0 2 4 / 6 0 H z
E X I T
• USER: Picture with low brightness.
Note
You can fine adjust the picture quality for each mode.
x Adjusting the backlight
(BACKLIGHT)
If the screen is too bright, adjust the backlight to make the screen
easier to see.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The PICTURE menu appears on the screen.
3 Press the m/M buttons to select
and press the OK button.
The BACKLIGHT menu appears on the screen.
4 Press the m/M buttons to adjust the light level and
press the OK button.
x Adjusting the contrast
(CONTRAST)
Adjust the picture contrast.
Note
While COLOR is set to sRGB, you cannot adjust CONTRAST,
BRIGHTNESS or GAMMA.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The PICTURE menu appears on the screen.
3 Press the m/M buttons to select 6 (CONTRAST) and
press the OK button.
The CONTRAST menu appears on the screen.
4 Press the m/M buttons to adjust the contrast and
press the OK button.
x Adjusting the black level of an image
(BRIGHTNESS)
Adjust the picture brightness (black level).
Note
While COLOR is set to sRGB, you cannot adjust CONTRAST,
BRIGHTNESS or GAMMA.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The PICTURE menu appears on the screen.
12
(GB)
(PICTURE) and
(BACKLIGHT)
(PICTURE) and
(PICTURE) and