Herunterladen Inhalt Inhalt Diese Seite drucken

Avdel ESN50LAV Bedienungsanleitung Seite 8

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Instruction Manual
Riveting tool ESN50LAV
Pinch points:
• Remove
changing die, matrice, or
head.
• Keep hands away from the
riveting
riveting.
Failure to observe these warn-
ings could result in severe injury
or death.
WARNING
Do not dispose of batteries in a fi re. They will
vent fumes and may explode.
Failure to observe this warning could result in
severe injury from harmful fumes or burns from
fl ying debris.
WARNING
Inspect tool, dies & matrice and head before
use. Replace any worn or damaged parts. A
damaged or improperly assembled tool can
break and strike nearby personnel.
Failure to observe this warning could result in
severe injury or death.
CAUTION
• Do not use this tool for continuous use. After
150 to 200 cycles, allow the tool to cool for
15 minutes.
• Do not secure this tool in a vise. This tool is
designed for hand-held operation.
• This tool shall not be used in damp or wet
environments. Damage may result when the
electrical components are soaked.
• Use this tool for the manufacturer's intended
purpose only.
Failure to observe these precautions may result
in injury or property damage.
HE.17489_A © 06/2016
IMPORTANT SAFETY INFORMATION
WARNING
battery
before
tool
head
when
CAUTION
Do not allow anything to contact the battery
terminals.
• Do not immerse the batteries in liquid. Liquid
may create a short circuit and damage the
battery. If batteries are immersed, contact
your service center for proper handling.
• Do not place the battery into a pocket, tool
pouch, or tool box with conductive objects.
Conductive objects may create a short circuit
and damage the battery.
• Do not place a battery on moist ground or
grass. Moisture may create a short circuit and
damage the battery.
Failure to observe these precautions may result
in injury or property damage.
CAUTION
• Do not store the battery at more than 122 °F
(50 °C) or less than –4 °F (–20 °C). Damage to
the battery can result.
• Do not use another manufacturer's charger.
Other manufacturers' chargers may over-
charge and damage the battery.
• Do not attempt to open the battery. It con-
tains no user-serviceable parts.
Failure to observe these precautions may result
in injury or property damage.
CAUTION
Do not perform any service or maintenance
other than as described in this manual. Injury or
damage to the tool may result.
Failure to observe this precaution may result in
injury and property damage.
Note: Keep all decals clean and legible, and replace
when necessary.
2
US

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis