FLIR TG267 Schnellanleitung Seite 5

DISPLAY DESCRIPTION
See Figure 2, Display Description, page 1.
1. Menu area
2. Date and time
3. Battery status indicators
4. Bluetooth® active
5. Image memory status indicator
6. USB connection active
7. Camera image area
8. Center spot cross-hairs
9. Laser Pointer active
10. Center spot temperature measurement
11. Thermocouple measurement (TG267)
PROGRAMMING MENU
• Short press the MENU button to access the menu system.
• Use the up/down arrow buttons to navigate and scroll.
• Use the MENU button to make selections.
• Use the RETURN button to back up.
• Pull the trigger to exit the menu system.
• Main menu: Light (Flashlight), Gallery (Captured images), Image
Adjustments (below), and Settings (below).
• Image Adjustments menu: Image Modes (MSX® or Visible cam-
era) and Colors (Display palettes).
• Settings menu: Measurement (Center spot, Emissivity, Thermo-
couple), Device Settings (Bluetooth®, Laser, Screen brightness,
APO), & General Settings (Temperature units, Time/Date, Lan-
guage, System Info).
• General System Info menu: Company information.
TYPE-K THERMOCOUPLE (TG267)
Connect thermocouple to jack in top compartment. Touch the probe
to a test surface or hold it in air. Read the temperature on the dis-
play (next to TC icon). If necessary, enable the thermocouple mode
in the Settings sub-menu (under Measurements). Do not exceed
the temperature range printed on the thermocouple label. See Fig-
ure 5, Type-K Thermocouple, page 1.
WORKING WITH IMAGES
Go to Gallery in the menu system. Use the arrows to scroll and
MENU to open images. Press MENU at an opened image to see
image options. Press MENU at the SEND option to transmit the
#NAS100021; r. AA/58278/58475; mul
3