General Characteristics - Cembre SD-15P-ECO Bedienungsanleitung

ENGLISH

1. GENERAL CHARACTERISTICS

– Max. drilling capacity: ............................................................................................................................ Ø 25 mm
Depending on the type of wood, it is also possible to drill larger diameters.
For specifi c applications, please contact Cembre.
– Maximum drilling thickness: ................................................................................................................ 200 mm
– Speed without load: .................................................................................................................................. 850 rpm
– Space dimensions
– Weight: .............................................................................................................................................................. 19,7 kg
1.1) 2 stroke combustion engine
– Type:.................................................................................................2-stroke, horizontal shaft, single cylinder
– Model: ............................................................................................................................................ KAWASAKI TJ53E
– Displacement: ..............................................................................................................................................53.2 cm
– Power (SAE J1349): ..................................................................................................................2.0 kW / 8500 rpm
– Fuel: ................................................................................................2% (1:50) petrol mixture (see § 9 page 11)
– Fuel consumption: ............................................................................430 g/kW.hr - 320 g/hp.hr / 8500 rpm
– Clutch: ...............................................................................................centrifugal with automatic intervention
– Start: ....................................................................................................by rope pull with automatic rewinding
– Ignition: ....................................................................................................... solid state ignition (none breaker)
– Spark plug: .......................................................................................................................................... NGK BPMR8Y
– Fuel tank capacity: ..................................................................................................................................... 1,1 litres
– Emissions: .................................................................................................................. according to "Phase 2" EPA
regulation engines class V and European Directives 97/68/EC, 2001/63/EC and 2002/88/EC.
– A centrifugal clutch assists with start up and auger positioning at low speed. If the engine stalls
during the drilling operation, the machine may be restarted with the auger remaining in the
sleeper.
1.2) Emergency lever for quick auger release: if necessary, this lever allows immediate release of
the auger from the machine, which can then be removed from the working area.
1.3) Shock absorber: located between the drive shaft and the spindle to drastically reduce vibration
to the operator.
1.4) Adjustable depth gauge: a graduated scale on the fi xed guard enables the desired hole depth
to be set, which automatically stops the travel of the auger.
1.5) Adjustable main handle: the handle controlling the drilling machine during operation, can
be fi xed in two diff erent positions.
Incorporated, on the right hand side are the machine controls:
– "ON/OFF" switch.
– Accelerator.
– Accelerator lock button.
1.6) Fixed guard: stainless steel guard protecting the spindle, featuring a graduated depth gauge.
DRILLING MACHINE FOR WOODEN SLEEPERS
(See Fig. A)
(drilling machine with support trolley)
......................................................... see page 58
3
4