Speaker System Setting - Panasonic CY-PA2003N Bedienungsanleitung

Speaker System Setting <CY-PA4003N>
2CH Input
4-channel Speaker System
Input the left channel (white). Input the right channel (red).
Speaker output CH A
Not used.
Left Right
(min. 2 ) (min. 2 ) RCA cord (option)
(from Head Unit output terminal)
Speaker output CH B
Left (min. 2 ) Right (min. 2 )
2-channel Speaker System
Input the left channel (white). Input the right channel (red).
Not used.
Speaker output CH A
Left (min. 4 ) RCA cord (option)
(from Head Unit output terminal)
(Bridge connection)
Speaker output CH B
(Bridge connection)
Right (min. 4 )
16 CY-PA4003N/PA2003N/PAD1003N
(continued)
Special Application
Example: If the Head Unit only has a single pre-out,
connect it to this unit for 4-channel audio output.
Switch to 2CH.
Note:
 The fader control is ineffective.
 The speaker outputs A and B are at the same
level.
 The 3-channel speaker output is not allowed
with the 2-channel input connection.
 When the Head Unit is connected to the RCA
cord, note that the RCA white and red leads
differ in color from the unit terminals.
Special Application
Example: If the Head Unit only has a single pre-out,
connect it to this unit for 2-channel audio output.
Switch to 2CH.
Note:
 This is not a monaural output.
 The 3-channel speaker output is not allowed
with the 2-channel input connection.
 When the Head Unit is connected to the RCA
cord, note that the RCA white and red leads
differ in color from the unit terminals.
Speaker System Setting <CY-PA2003N>
2-channel Speaker System (Stereo)
INPUT
RCA cord (option)
(from Head Unit output terminal)
Speaker output
Left
Right
(min. 2 )
(min. 2 )
1-channel Speaker System (Monaural)
INPUT
RCA cord (option)
(from Head Unit output terminal)
Subwoofer
(Bridge connection)
Speaker output
(Monaural)
LeftRight
(min. 4 )
CY-PA4003N/PA2003N/PAD1003N 17