Operation And Display Manual / Bedien- Und Anzeigeanleitung - Sigma EOX REMOTE 500 Technische Dokumentation

2.7. Operation and display manual
Function
Turn e-system on
Turn e-system off
Increase assist mode
Decrease assist mode
Turn light on
Change light mode
Turn light off
Automatic light
Trigger start-up assistance
EOX ® VIEW 1200
remote control
EOX ® APP and
EOX ® VIEW 1300
remote control
Battery level
Error messages
Operation
[POWER]
[POWER]
[UP]
[DOWN]
[LIGHT]
[LIGHT]
Hold down [LIGHT] button
(2s)
automatic
Motor assistance must be
enabled (show any color on
4 upper LEDs). Hold down
[DOWN] + [C] button.
[A], [B], [C]
[A], [B], [C]
automatic
automatic
Display
LED animation > LEDs ON
LED animation > LEDs OFF
OFF > LIGHT BLUE > DARK
BLUE > GREEN > PINK >
RED
RED > PINK > GREEN >
DARK BLUE > LIGHT BLUE
---
---
---
---
White (flashing)
See chapter 3.8
Red (flashing)
Comment
R500 turns on the
e-system (if e-system is
turned on by battery, R500
turns on automatically).
R500 turns off the
e-system (if e-system is
turned on by battery, R500
turns off automatically).
Shown on upper four LEDs
Shown on upper four LEDs
Manually activating the light
disables the automatic light
feature temporarily.
Light mode switches
between low beam and
high beam (if supported by
e-system)
Manually deactivating the
light disables the automatic
light feature temporarily.
If automatic light feature is
enabled the R500 automa-
tically turns the light on in
dark conditions and turns
the light off in bright
conditions.
Shown on upper four LEDs
If an EOX ® VIEW 1200 is
used the R500 controls it by
remote.
If no EOX ® VIEW 1200 is
used the R500 controls the
EOX ® APP or EOX ® VIEW
1300 by remote.
Shown on lower 5 LEDs
Shown on LED indicator.