Gima L100 Anleitung Seite 2

OVERBED TABLE
Thank you for choosing this Overbed Table – L100.
1 General
1.1 Symbols
Signal words are used in this manual and apply to hazards or unsafe practices which could result in person-
al injury or property damage. See the information below for definitions of the signal words.
Warning
Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious
injury.
Important
Indicates a hazardous situation that could result in damage to property if it is not avoided.
Gives useful tips, recommendations and information for efficient, trouble-free use.
1.2 Safety
Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact carrier or
dealer for further instruction.
Weight Limitation
The horizontal and vertical static loading limitation of the L100 is 25 kg (55 lbs).
General Warnings
DO NOT use this product or any available optional equipment without first completely reading and under-
standing these instructions and any additional instructional material such as owner's manuals, service
manuals or instruction sheets supplied with this product or optional equipment. If you are unable to under-
stand the warnings, cautions or instructions, contact a healthcare professional, dealer or technical person-
nel before attempting to use this equipment - otherwise, injury or damage may occur.
ALWAYS check the overbed table for proper tightness before using.
THE technical improvements of products will be compiled into new version of user manual without notice.
Please in kind prevail if the appearance and color of products are changed.
Accessories Warning
IDEAL products are specifically designed and manufactured for use in conjunction with IDEAL accessories.
Accessories designed by other manufacturers have not been tested and are not recommended for use
with IDEAL products.
Installation Warning
ALWAYS use extreme caution when installing the column assembly, because it is with a sharp in the end
of horizontal tub, please don't touch the sharp before completion of installation, otherwise injury or damage
might occur. After any adjustments, repair or service and before use, make sure that all attaching compo-
nent parts are secure.
2 Parts (Packing) List
Top Board
Caster * 2 + Caster with lock * 2
Lock bar Knob * 2
and Locating gasket
3 Assembling the Overbed Table (
1) Open end of box and then slide contents out of box.
2) Collect base, top board, column assembly, hardwares and this user manual.
3) Put the column assembly upon base, then install base one by one with M8 hex bolt by 13mm wrench.
4) Lock bar insert into horizontal tube and anther side's locating gasket, then install knob, finally insert into
the tube of table board and tighten the knob securely.
5) Adjust the height of table to user's comfortable position and then fix by knob with screw.
6) Check the lock of caster, release the lock to move and lock on the contrary.
Please keep caution and DO NOT touch the sharp in the end of hospital tube when assemble.
27448 / L100
Imported by:
Gima S.p.A.
Via Marconi, 1 - 20060 Gessate (MI) Italy
gima@gimaitaly.com - export@gimaitaly.com
www.gimaitaly.com
Made in China
Horizontal tube
Base * 2 Column Assembly
MANUAL
M8 Hex bolt * 2 User Manual
Refer to the FIGURE 1)
Knob to fix the table board
Locating gasket
Caster with lock
FIGURE 1 Assembling the Overbed Table
4 Using the Overbed Table ( Refer to the FIGURE 2)
1) Release the knob with screw to adjust the height and then tighten and fit when the table is at the desired
height.
2) Release the knob with screw to let the board downward to the desired height or return to original / lowest
position, then tighten and fit.
Knob to fix the table board
FIGURE 2 Using the Overbed Table
This table is designed for use as a movable patient/resident table top surface for reading, eating, or
keeping small personal items such as glasses, telephone, or books within easy reach.
This table is designed for indoor use ONLY within close proximity of skilled caregivers. It is not designed
to hold electrical items (such as televisions, computer monitors, coffee pots, etc.) and should not be used
near open flames and excessive heat.
Maximum weight limitation for this product is 25 kg (55 lbs); weight should be evenly distributed over the
table top surface to help maintain a stable condition.
DO NOT overload the table as that could result in breakage, as well as damage to property and/or serious
injury.
Use ONLY as directed for its intended use. This product should NOT be used: as a sleep surface; as a walk-
er or mobility aid to assist a person in walking, sitting down or standing up; to prevent or brace a person's
fall; or to help transport persons or items.
5 Measurements (Unit: mm) ( Refer to the FIGURE 3)
Board thickness 16mm
580 mm
FIGURE 3 Measurements
6 Parameters
Parameter Name L100
Total length 640 mm
Total width 406 mm
Total height (Table board 710 mm
at lowest position)
Horizontal static load 25 kg
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
Lock bar
Table board
Horizontal tube
Column tube of height adjustable
Knob with screw to fix the height
Column tube to connect with bases
Groove
Caster
M8 Hex bolt by 13mm wrench
Height Adjustable
(710 – 1150mm)
Knob with screw to fix the height
600 mm
95 mm
Diameter 40mm
Vertical static load 25 kg
Horizontal durability 10 kg
Vertical impact 10 kg
Net weight 6,9 kg
Gross weight 8,2 kg
Carton size 650 x 64 x 670 mm
400 mm
400 mm