Cabletech ANT0022 Bedienungsanleitung Seite 8

INSTALLATION
• Insert coaxial cable into appropriate TV port. In order for built-in signal
amplifier to work, AC/DC power adapter must be plugged to power
mains socket (ANT0022), USB power supply must be connected to
USB port (ANT0024), or directly from powered RF port in the TV (if
TV supports this function).
• To get the best signal quality, the antenna should be pointed at
broadcast station. To mount the antenna, use provided mounting tape
or screws.
Caution: Do not place the antenna on metal surfaces, or close to such
devices like air conditioning, elevator, hair dryer, microwave oven etc., or
the signal can be distorted. If it's possible, place the antenna close to a
window. It is advised to try multiple locations, and pick the best.
POWERING WITH AC/DC POWER ADAPTER
POWERING FROM USB PORT
ENi
OWNER'S MANUAL
8