Troubleshooting - Hisense HR6SBSFF566S Benutzerhandbuch

you open the door. Wash seal with a
mild detergent and warm water. Rinse
and dry it thoroughly after cleaning.
Caution! Only after the door seals are
completely dry should the appliance be
powered on.
Replacing the LED light
Warning: The LED light should not
be replaced by the user. If the LED
light is faulty, contact the

Troubleshooting

If you experience a problem with your appliance or are concerned that the
appliance is not functioning correctly, you can carry out some easy checks
before calling for service, please see below. You can carry out some easy
checks according to this section before calling for service.
Warning! Don't try to repair the appliance yourself. If the problem persists
after you have made the checks mentioned below, contact a qualified
electrician, authorized service engineer or the shop where you purchased the
product.
helpline for assistance. To replac
t he LED light, the followin
c
an be used:
1.Unplug your appliance.
2 . Remove light cover by pushing up
and out.
3.Hold the LED cover with one hand
and pull it with the other hand while
pressing the connector latch.
4.Replace LED light and snap it
customer
correctly in to place.
18
e
g
s tep s