Hisense HR6SBSFF566S Benutzerhandbuch Seite 37

large quantities of frozen food.
The method of removal of the
3.
The water dispenser located in the fridge
door, is for storing drinking water. With this
appliance you can obtain chilled water
easily without opening the refrigerator. You
should be informed of following tips.
Before using
Before using this appliance for the first time,
you should use it as follows.
1. Hold one bottom side of the water tank
by a hand, lift up the opposite side by the
other hand,when the slot of the water tank
is off from the guide, change hands to
repeat these steps.
2. Hold the two sides of the water tank
tightly, lift up and put out of the water tank.
3. Unscrew the head, then clean head ,lids
and the water tank.
Caution!
Drain the water tank befor you take it down!
Assembling
After cleaning, please assemble the parts
including the head, water tank and lids as
follows:
1. Put the seal ring in order first ( the seal
ring can not turn up), then insert the head
into the hole.
2. Hold the two sides of the water
tightly, fit the water tank along the guids
e
on the door.
3. Push the two sides of the water tank
downward as the picture shows.
4. When you hear clicks by both sides and
at the same time the both sides of the water
tank is closed to the door liner, It means the
installation is completed.
Filling water
Before you fill the drinking water into the
water tank, ensure that the water tank is
steady and in a correct position.
14
guide
head
slot
tank
seal ring