Tape Operation - Classic Phono TCD-2550 Bedienungsanleitung

Press the [FUNCTION] button (4) to select USB mode;
3.
Playback will start automatically from the first track.
4.
PROGRAMMING
The PROGRAMMING operation is the same as that of CD-MP3.
Notes:
Some mp3 player may not be able to play via the usb socket. this is not a
•
malfunctioning of the system.
The USB port is not designed for charging smartphones or other devices.
•

TAPE OPERATION

Press the [TAPE] source button (10);
1.
Insert a cassette TAPE into the [CASSETTE MECHANISM] (22);
2.
The system will start playback automatically;
3.
Press [TAPE FORWARD/EJECT] button (21) half way during playback to start quick
•
tape winding in forward direction.
Slightly press the [TAPE FORWARD/EJECT] button (21) again to resume playback.
•
Press the [TAPE FORWARD/EJECT] button (21) completely inwards and the
•
cassette tape will be ejected.
DIRECT USB ENCODING Remark:
Recording speed is 1:1.
•
No song title will be recorded during encoding mode.
•
To avoid damage to USB memory, remove it only when the radio is turned off.
•
ENCODE FROM PHONO AND CASSETTE:
Plug the USB stick into the [USB PORT] (1);
1.
Perform normal playback of the source you want to encode & record;
2.
Press the [RECORD] button (5 or 37) twice to start encoding. On the display will
3.
flash "REC";
Once the record is finished, press the [STOP] button (14 or 41) to stop recording.
4.
ENCODE FORM CD:
Encode 1 track:
Plug the USB stick into the [USB PORT] (1);
1.
Perform normal playback of the track you want to encode & record;
2.
Press the [RECORD] button (5 or 37) twice during the playback of the desired
3.
track.
The playback will stop and restart automatically. The "USB" text on the top of the display
11