Using Your Induction Hob; To Start Cooking - KKT KOLBE IND9020RL Bedienungsanleitung

Using your induction hob

6. Using your Induction Hob

6.1 To start cooking

1. Touch the ON/OFF
After power on, the buzzer beeps once, timer control
shows „00", heating zone selection controls show
„ ", or „ " or „
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that you wish
to use.
Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Touching the heating zone selection control,
and a indicator next to the key will flash.
4. Adjust the heat setting by moving your finger over
the slider control or tap the desired intensity level
directly on the slider bar.
• If you don't choose a heat setting within 1 minute,
the ceramic hob will automatically switch off.
You will need to start again at step 1.
• You can modify the heat setting at any time during
cooking.
• You can modify the power level from 0 to 9 by the
slider control.
control.
", indicating that the induction
Power up
Power down
Tap directly
33