Bosch AKE 30 LI Originalbetriebsanleitung Seite 24

24 | English
Cordless chain saw
Battery
Article number
Rated voltage
Capacity
Charging period (battery discharged)
Number of battery cells
Battery Charger
Article number
Charging current
Allowable charging temperature range
Weight according to EPTA-Procedure 01/2003
Protection class
Please observe the article number on the type plate of your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured sound values determined accord-
ing to 2000/14/EC.
Typically the A-weighted noise levels of the
product are: Sound pressure level 74 dB(A);
sound power level 94 dB(A). Uncertainty
K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
2
tainty K =1.5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accord-
ance with a standardised test given in EN
60745 and may be used to compare one tool
with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level repre-
sents the main applications of the tool. How-
ever if the tool is used for different applica-
tions, with different accessories or poorly
maintained, the vibration emission may differ.
This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vi-
bration should also take into account the
times when the tool is switched off or when it
is running but not actually doing the job. This
may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration
such as: maintain the tool and the accesso-
ries, keep the hands warm, organisation of
work patterns.
Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical data"
is in conformity with the following standards
or standardization documents: EN 60745
(battery powered product) and EN 60335
(battery charger) according to the provisions
of the directives 2006/95/EC, 2004/108/EC,
2006/42/EC, 2000/14/EC.
EC Type Certification No. 2131439.01CE by
notified testing agency No. 0344, KEMA Qual-
ity B.V. Arnhem, Netherlands.
F 016 L70 758 | (22.11.10)
2
<2.5 m/s , Uncer-
h
V=
Ah
min
AL 3640 CV
Professional
EU 2 607 225 099
UK 2 607 225 101
AU 2 607 225 103
A
°C
kg
2000/14/EC: Guaranteed sound power level
97 dB(A). Conformity assessment procedure
according to Annex V.
Equipment category: 6
Technical file at:
Bosch Lawn and Garden Ltd., PT-LG/EAE,
Stowmarket, Suffolk IP14 1EY, England
09
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
19.11.2010
Assembly
For Your Safety
Warning: Switch off and remove battery
from power tool before adjusting or
cleaning.
Do not use 4.5 Ah battery with this power
tool.
Removing the Battery (see figure A)
The battery 17 is equipped with two locking
levels that should prevent the battery from
falling out when pushing the battery unlock-
ing button 18 unintentionally. As long as the
battery is inserted in the power tool, it is held
in position by means of a spring.
Note: The power tool will not operate unless
both locking levels are engaged.
To remove the battery 17:
Push the battery against the base of the
power tool (1.) and at the same time
press the battery unlocking button 18
(2.).
Pull the battery out of the power tool
until a red stripe becomes visible (3.).
Press the battery unlocking button 18
again and pull out the battery completely.
AKE 30 LI
Li-Ion
2 607 336 107
AL 3620 CV
Professional
2 607 225 657
2 607 225 659
2 607 225 661
4.0
0– 45 0– 45
1.0
/II
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools
36
2.6
95
20
2.0
0.6
/II