D Escali N G Pro G R Am M E - AXENT ONE Bedienungsanleitung

CLEANING AND CARE
C LE AN I N G TH E S PR AY AR M
The stainless steel spray arm should be cleaned at regular intervals.
Settings mode is active.
1. Press Spray Arm Position
2. The spray arm extends without spraying any water.
3. Clean the spray arm with a soft cloth (cotton, not microfibre) or a soft brush, without
exerting any pressure.
4. To finish, press Spray Arm Position
The spray arm moves back to its starting position.

D ESCALI N G PRO G R AM M E

The entire water system can be descaled as easily as a coffee machine.
Fill a container with 200 ml liquid descaler (preferably Durgol, dilute if necessary as per
manufacturer's instructions).
Settings mode is active.
1. Press Flow Rate .
The process starts and the water system is fully emptied.
The spray arm extends without spraying any water.
2. Immerse the spray arm in the container of liquid descaler.
3. The liquid is absorbed.
4. The spray arm moves back to its starting position. The liquid descaler circulates all around
the water system and dissolves any limescale.
5. The liquid descaler is flushed away automatically.
The entire water system is purged three times with fresh water.
This process takes about 3 minutes.
The night light flashes slowly throughout this process.
Do not interrupt the descaling programme once it has started.
.
or Stop .
EN 15