System Reset - AXENT ONE Bedienungsanleitung

SETTINGS
S I G NAL TO N E
Settings mode is active.
1. Press User Profile
icon - flashes slowly
2. The
- flashes quickly
3. The display switches off after a few seconds, and your setting is saved.
Factory setting: The signal tone is active.
SYSTE M R ES ET
You would like to reset your personal settings to the factory default settings.
Settings mode is active.
1. Press and hold Temperature
2. Stop flashes three times.
3. The settings of the remote control and the device are reset to the factory settings.
S H OWE R TO I LET STAN D BY M O D E
If you are away for prolonged periods (e.g. on holiday), you can set the shower toilet
to standby mode.
Settings mode is active.
1. Simultaneously press User Profile
2. Hold until Stop flashes three times and then switches off.
3. The Standby mode of the device is now activated.
To deactivate standby mode, gently knock the rear cover on the left side.
multiple times.
the signal tone is active.
the signal tone is off.
and press Flow Rate
and Spray Arm Position
once.
.
EN 11