Klarstein Basel Baseline Bedienungsanleitung Seite 24

EN
24
Freestanding Installation
• Before using the appliance, the heater base (supplied separately in the carton),
must be fitted to the appliance.
• Take the heater base out of the carton and four silver fixing screws supplied in the
instruction manual bag.
• Remove the front glass panel of the heater.
• Place the metal body horizontally on a stable table.
• There are four installation holes at bottom of the heater as indicated (see Fig. 7).
• The heater base has two plastic posts, make sure the posts insert the right holes at
bottom of the heater as indicated (see Fig. 8).
• Make sure the heater base is firmly attached to the heater, then fix the heater base
firmly by the four silver fixing screws supplied, as indicated (see Fig. 9).
Figure 7
Figure 9
Figure 8