Before Commissioning - National Geographic 9070300 Bedienungsanleitung

15 Outdoor temperature value
17 Selected channel for remote
sensor
19 Symbol when snooze func-
tion is activated
21 Symbol for radio signal
23 Selected transmission chan-
nel

8 Before commissioning

NOTICE
Avoid connection faults!
In order to avoid connection problems between the devices,
the following points must be observed during commission-
ing.
1.
2.
3.
4.
5.
When changing the batteries, always remove the batteries
in both the base unit and the sensor and reinsert them in
the correct order so that the radio connection can be re-es-
34 / 64
Place the base unit (receiver) and sensor (transmitter)
as close together as possible.
Connect the power supply to the base unit and wait un-
til the indoor temperature is displayed.
Establish power supply for the sensor.
Set up/operate the base unit and sensor within the ef-
fective transmission range.
Make sure that the base unit and the radio sensor are
set to the same channel.
16 Symbol for temperature
alarm (highest or lowest
value)
18 Outdoor temperature informa-
tion
20 Battery level indicator (Re-
mote sensor)
22 Outdoor temperature value