Bestway HYDRO PRO 24060 Bedienungsanleitung Seite 3

2. Ensure the buckle on the straps is locked before usage. Hold both sides of
the mask snd place onto your face properly. sliding the straps to make sure
the mask skirt seals the face comfortably and tightly. Refer to Figure 4&5.
DO NOT push with excessive force when attaching the Breathing Tube to the
Snorkel Mask, as this may affect the leak-proof seal.
If you are having trouble attaching the Breathing Tube and Snorkel Mask, there
may be I sand or debris present. Rinse all parts and make sure there is no
debris remaining, then try attaching it again.
NOTE:
If the mask is positioned incorrectly, water may enter into the chin and forehead areas.
Please adjust the headband and straps to securely fit around your head.
REMOVING THE BREATHING TUBE
3