Bestway Hydro-Force 65346 Bedienungsanleitung Seite 3

6.
Usage of the SUP
1. Adjust the length of oar before using the SUP (Fig 1).
2. Kneel on the board (Fig 2).
3. Gradually stand up on one leg (Fig 3).
4. Stand up with the other leg and keep your hands on the board (Fig 4).
1
5
Extended exposure to sun can shorten the lifespan of your SUP.
We suggest not leaving SUPs in direct sunlight for more than 1 hour after use.
Maintenance and storage of the SUP
1. Disassemble the fin (Fig 1).
2. Deflate the SUP by pushing on the pin and rotating clock wise. (Fig 2).
3. Fold the SUP, but not more than 10 cm every time (Fig 3).
1.
Store in a cool, dry place and out of children's reach. Do not unfold this product when the temperature is low. The product should be room
temperature (over 20°C) for 24 hours before inflation.
Repair
1. Deflate the board (Fig 1).
2. Clean around the surface around the leak (Fig 2).
3. Cut the repair patch to the suitable size (Fig 3).
1. 2.
7.
2
6
2.
3.
8.
5. Maintain balance with paddle (Fig 5).
6. Keep knees slightly bent, increase the balance buffer and start rowing (Fig 6).
7. Begin to row after standing up (Fig 7).
3
7
4. Pack the SUP (Fig 4).
5. Insert the SUP in bag (Fig 5).
3.
4. Apply the glue and patch on the damaged surface (Fig 4).
5. Press the repair patch for 30 sec (Fig 5).
6. Wait 24 hours before use (Fig 6).
4.
3
9.
4
4.
5.
30
Sec
10.
5.
6.
24h